CEMENTING SOLUTIONS / SPACER SYSTEMS

SHIELD BOND® Product Line

SHIELD BOND® NXT

SHIELD BOND® NXT

Applications
  • Used in fragile and fractured formations
  • When circulating drilling fluid is an issue
  • In wells where pre-job simulations show final ECD near or above the frac gradient
  • When the capability to mix on-the-fly with a weighted spacer is preferred
  • ‍For use in high temperature drilling environments
Advantages
  • Adjustable rheology
  • Extends the frac gradient for higher ECDs
  • Enhances hole cleaning and mud removal prior to cement placement
  • Forms a shield against the formation to limit fluid invasion
  • Reduces cement losses and formation damage

Product Data Sheet

English
Spanish
SHIELD BOND®

SHIELD BOND®

Applications
  • Used in fragile and fractured formations
  • When circulating drilling fluid is an issue
  • In wells where pre-job simulations show final ECD near or above the frac gradient
  • When the capability to mix on-the-fly with a weighted spacer is preferred
Advantages
  • Adjustable rheology
  • Extends the frac gradient for higher ECDs
  • Enhances hole cleaning and mud removal prior to cement placement
  • Forms a shield against the formation to limit fluid invasion
  • Reduces cement losses and formation damage

Product Data Sheet

English
Spanish
SHIELD BOND® LC1k

SHIELD BOND® LC1k

Applications
  • Used during partial to severe lost circulation where fracture sizes of 1,000 microns exist.
  • Used in high permeability formations, unconsolidated and fractured formations when losses were observed during the drilling phase.
Advantages
  • Enhances the SHIELD BOND® spacer system’s effectiveness when losses are problematic Effective at sealing a wide range of fracture widths in various formations
  • Withstand differential pressures >1000psi

Product Data Sheet

English
Spanish
SHIELD BOND® LC3k

SHIELD BOND® LC3k

Applications
  • Used during partial to total lost circulation where fracture sizes of 3,000 microns exist.
  • Used in high permeability formations, unconsolidated and fractured formations when losses were observed during the drilling phase.
Advantages
  • Enhances the SHIELD BOND® spacer system’s effectiveness when losses are problematic Effective at sealing a wide range of fracture widths in various formations
  • Withstand differential pressures >1000psi

Product Data Sheet

English
Spanish
Loss-Prevention Spacer System

Built on proprietary Wellbore Shielding® chemistry proven in thousands of wells worldwide, the SHIELD BOND®  loss-prevention spacer system goes beyond the traditional spacer functions of separation and mud displacement. SHIELD BOND is specially formulated to allow cement circulation to the programmed top of cement (TOC) where the equivalent circulating density (ECD) window is tight, or in fragile and fractured formations. The SHIELD BOND spacer system forms a temporary, impermeable shield over the formation, mitigating lost circulation issues during cementing and formation damage. Typical cement spacer systems are not designed to address pre-existing losses or induced losses.

At the heart of our leading loss-prevention spacer system is a uniquely engineered ultra-low invasion additive that essentially deposits a thin but impermeable “shield” across a wide range of matrix pores and microfractures. This non-damaging Wellbore Shielding chemistry creates an extremely low-permeability barrier, minimizing fluid and pressure invasion to prevent losses and preserve wellbore stability.